LEFT HANDLEBAR CONTROLS

Dimmer switch/Passing switch | Press the switch (1) upwards for high beam and downwards for low beam. It gives an indication of passing ahead. Press "Passing Switch" to operate the passing lamp.

We recommend the user to use the Passing Switch to intimate the traffic on the road that you are planning to perform an overtake.

Home screen navigator control | The home screen navigator control (2) is used to access the following functions of the TFT:

 * Up–Scroll the home screen from the bottom to the top.

 * Down–Scroll the home screen from the top to the bottom.

 * Left–Scroll the home screen to the left.

 * Right–Scroll the home screen to the right.

 * Center - Press to confirm selection.

Warning: -

 * The Home screen navigator control should not be used while driving for your own safety and the safety of fellow rider and/or pedestrians.

* Home screen navigator control assists you to control the TFT home screens, don't be distracted while driving.

Hazard switch ( )

To use this feature, press the hazard switch (3) in "Vehicle On" condition. Upon pressing the hazard switch, all turn signal lamps start flashing simultaneously to warn other road users behind you about hazard/ obstruction ahead. Press the hazard switch (3) in vehicle "ON" condition whenever your vehicle becomes a temporary hazard for other road users OR it is necessary to park the vehicle due to breakdown OR other unavoidable problems.

To turn “OFF” the indicator lamps, press the hazard switch again.

Note: -

Use hazard lights only when your vehicle becomes a temporary hazard for other road users.

Turn signal switch | Shift the turn signal switch (4) sideways for right/left indications and leave it to come back to its normal position on its own.

IMPORTANT: To switch “OFF” the turn signal after completing the turn, gently push the switch inside. Refer pictorial representation.

Horn switch | Press the horn switch (5) to operate the horn.