Test Ride Reserve
  • Vida V1 PRO
  • Vida V1 PLUS
  • Locate nearest dealer
  • MAKE WAY
  • Offers
  • Blogs
  • Battery+
  • Service
  • About Us
  • Charging
  • Subscription
  • Contact Us

Are you sure you want to leave this page?

OWNER'S MANUAL | Vida V1
k. Helmet Holder

Helmet holder (1) is located under the seat.  

 

To access the holder or to secure a helmet (2) to the holder: -

• Open the seat (explained in another chapter of this Owner's Manual)

• Attach/Hook the helmet strap or ring to the helmet holder and close the seat. Make sure the seat is secured before riding.

! CAUTION: -

 

Gently close the seat by hand. Sudden dropping of the seat may result in breakage of the seat lock and malfunction of the lock.

To release the helmet from the holder: -

• Open the seat.

• Remove the helmet from the holder and close the seat.

! WARNING: -

 

• Riding with a helmet attached to the holder can interfere with smooth riding and/or surrounding objects. Hence this is not advisable as it may cause loss of control and may cause injury.

• Use the helmet holder only while being parked. Do not ride with a helmet secured by the holder.

NOTE : -

 

* Helmet Icon on TFT :  When the vehicle is turned “ON”, helmet icon blinks for 10 sec. It is a headset connected to a mobile phone or Bluetooth enabled helmet connected to a mobile symbol.

* Place the helmet inside the luggage compartment if you wish to carry it along with the vehicle on a ride. Even in this case, we advise rider and pillion rider to wear Helmet, even if it is for shorter span/distance.