HOW TO RIDE YOUR VEHICLE

Always follow the proper starting procedure described below:

STARTING THE VEHICLE

• Park the vehicle on levelled surface.

• Turn the vehicle to power “ON”.

Note: -

• Ensure the FOB key is within the vicinity range of the vehicle (<2 meters)

• Ensure the battery is charged enough to travel the distance up to the destination.

Caution: -

• Make sure that the traction batteries are properly installed.

• This vehicle is equipped with a side stand motor kill feature (Covered in this Owner's Manual).

• This vehicle is equipped with a power saver mode (Covered in this Owner's Manual). 

• The motor start switch will only work when either the front or integrated brake lever is pressed.

• Press the motor start switch (1).

Note: -

The motor will not get “ON” if the throttle is twisted in any direction or vehicle is in motion.

Starting procedure

At any ambient temperature, turn the vehicle to “ON” condition and press the integrated/ rear brake lever, now press the motor start switch.

Motor Cut-Off.

Your vehicle is designed to stop the motor automatically, if it falls down.

Note: -

If the vehicle has fallen down, beeper sound will blow with hazard lamp blinking. To stop the beeper sound, power “OFF” the vehicle.

Caution: -

THE MOTOR IS SILENT TYPE- It makes no sound when its ON, or during riding. So, always keep an eye on the dashboard for the Power OFF/ON.